Design of fixture for face milling of support plate on cnc
Summary :
Table of Contents
- Abstract
- Fixture as defined
- Components of a fixture
- Analysis of the need
- Location and clamping
- Future scope
- References
Abstract
The milling fixtures are generally used on milling machines. The paper includes a unique aspect of designing of a milling fixture for cnc. This fixture uses locating and clamping device for face milling (185 mm x 300 mm) of support plate. The support plate is made up of cast iron & is one of the components of color mixing machine. The real time application of the research reflects from the fact that a real industrial component is taken for fixture designing. The paper uses newer and really innovative design of present day manufacturing industries for clamping, which is adjustable clamping lever with axial bearing. The clamping is accomplished by using two adjustable clamping levers. Enough care is taken that clamps must not loosen by vibration caused by interrupted cutting of the mill cutter. Interrupted cutting occurs especially at the beginning and end of the cut. Time estimation sheet for each operation is also included in the paper which proves the mass production feature of fixture from the fact that it just takes 36 second as machining time to accomplish face milling operation.
Keywords: fixture, face milling, Computerized Numerical Control (cnc), Adjustable clamping lever
Latest in the category : Physics & chemistry
1
Spectrum of consciousness: Evolution of the spectrum
Term papers | 10/01/2009 | en | .doc | 13 pages
4
Implementation of vector quantization technique in image compression and speech recognition system
Term papers | 09/21/2009 | en | .pdf | 6 pages
5
Analysis of comparative method for association rule mining
Term papers | 09/21/2009 | en | .pdf | 4 pages
Most downloaded in the last 30 days : Physics & chemistry
2
Synthesis and analysis of Ammonium vanadates and determination of water and Vanadium content in Ammonium decavanadate using manganometry
Research papers | 04/25/2009 | en | .doc | 8 pages
From the same author : Physics & chemistry
1
A novel approach for selection of production plant layout in manufacturing environment using madm methods: Strategy case study
Term papers | 09/18/2009 | en | .pdf | 3 pages
2
Prediction of quantity of export mango using neuro-fuzzy method
Term papers | 09/18/2009 | en | .pdf | 3 pages
3
Design and fabrication of hybrid solar water heater
Term papers | 09/18/2009 | en | .pdf | 5 pages
4
Comparison and performance analysis of pid controller and fuzzy controller for electrical dc drive
Term papers | 09/18/2009 | en | .pdf | 4 pages
Change Currency
Our guarantee :
How it works?
Quality guaranteed
Refunds
Secure payment
Who are we ?
